Acceptance Mark
120w 12V 4 pin din power supply


JSDKF100150-06
120w 12V 4 pin din power supply
Switching Adapter
Case Size : 160 x 66 x 31 mm
 
Output Voltage : 5 ~ 48 V。
Output Current : 2.0 ~ 16.0 A。
Max. Output Power : 200 W。
Ripple.(mV) max. : 250。
Line Regulation : ± 2 %。
Load Regulation : ± 5 %。
Avg.Eff.(%)25, 50, 75, 100% load : 86。
No Load Power Comsumption : < 0.3 W。
 
Note:
1 Weight : Approx 450g。
2 Optional output connectors。
 
Description:
Desktop power supply。
 
Features:
Universal input voltage。
Single output / dual output / triple output。
Pass LPS。
Optional output connectors。
Over Voltage Protection。
Over current protection。
Short circuit protection。
High efficiency & reliability。
Compact low profile package。
Two year warranty。
 
SAFETY AGENCY APPROVALS:
UL,cUL,GS,CE,FCC,SAA,MEPS,CEC,PSE,CCC,CB,C - Tick。


Specification:
Input voltage : 100 - 240VAC( Limits : 90 - 264VAC ) 。
Input frequency : 50 to 60Hz ( Limits:47 - 63Hz ) 。
Input current: 0.3A ~ 1.6A (rms) for 115 VAC,0.2 ~ 1.2A ( rms ) for 230 VAC。
Safety ground leakage current : Class 1 ( 3.5Ma ) Class 2 ( 0.25mA ) MAX @240 VAC 50Hz。
Output voltage : 5 ~ 48 V(±5% tolerance) 。
Output current : 2 ~ 16 A。
Output power range : 200 W Max.。
Ripple: 1% peak to peak maximum。  
Over voltage protection : N/A 。
Over current protection : All outputs protected to short circuit conditions。
Temperature coefficient : All outputs ± 0.04%/℃ maximum。
Transient response : Maximum excursion of 4% or better on all models. Recovering to 1% of final value within 500us after a 25% step load change。
Operating temperature : 0℃ ~ +40℃
Storage temperature : -40℃ to +85℃
Relative humidity : 5% to 95% non - condensing。
Derating : Derated from 100% at+40℃ linearly to 50% at 70℃
Efficiency : 85% minimum at full output。
Hold-up time : 5 msec minimum。
Line regulation : ± 1% maximum for any input voltage change between input voltage range。
Load regulation : ±5% variations from minimum to maximum output current。
Insulation resistance : 50 Mohm minimum from output to ground。
Inrush current : 15 AMPS @ 115 VAC, or 30 AMPS @ 230 VAC at 25℃ cold start
Withstand voltage : 4242 VDC from input to output。
Mean time between failure : 100,000 hours minimum at full load at 25℃ ambient
EMI requirements : Meets conduction limits of(a) FCC PART 15 CLASS B(b) CISPR22.2。
Safety requirements : Meets or exceeds : UL,cUL,GS,CE,FCC,SAA,MEPS,CEC,PSE,CCC,CB,C - Tick。
Warranty: 2 year。

BNNAER.jpg