NEWS
HOME > News
NEWS
2013-03-25
20130325 Safety Information
Most of the safety requirements of the LED lights is a reference to the traditional lighting products,
and according to its own characteristics, the formation of a set of security certification standards,
the LED safety certification is maturing. CB, CE Europe and North America, the NRTL (such as UL,
MET, CSA, etc.) certified in the LED spotlights safety certification, the international-based, voluntary
certification (CQC) in China.
Inside the CE certification, includes a low voltage security LVD and electromagnetic compatibility EMC
two instruction requirements, which LVD is performed in accordance with EN60598 (lighting), EN61347
(driver) standards, EMC is in accordance with EN55015, EN61547, EN61000-3-2 and EN61000-3-3
standards. In addition, LED lights are usually also need additional reference to IEC 62471, light biosafety
testing. NRTL certified implementation of standards UL1993, UL8750 and UL1310; FCC implementation
of standards for the FCC PART15 Subpart B. In China for LED lights is a voluntary certification (CQC),
perform standard GB24906-2010 (safety) and GB 17743-2007 (electromagnetic compatibility).
The NRTL certification (such as UL, MET, CSA, etc.) in the United States belonging to the non-mandatory
certification, the performance of product safety testing and certification, the scope of its certification
indulgence products EMC (EMC) characteristics. LED lighting products use the test standards UL8750,
UL 48, UL 496, etc.. UL8750 application will be installed in a non-hazardous location rated 600V branch
or lower the minimum securityrequirements of the components of the LED light source, the same applies
in connection to the battery, fuel cell isolation (no valid connection) Power the minimum security
requirements of the LED light source.
and according to its own characteristics, the formation of a set of security certification standards,
the LED safety certification is maturing. CB, CE Europe and North America, the NRTL (such as UL,
MET, CSA, etc.) certified in the LED spotlights safety certification, the international-based, voluntary
certification (CQC) in China.
Inside the CE certification, includes a low voltage security LVD and electromagnetic compatibility EMC
two instruction requirements, which LVD is performed in accordance with EN60598 (lighting), EN61347
(driver) standards, EMC is in accordance with EN55015, EN61547, EN61000-3-2 and EN61000-3-3
standards. In addition, LED lights are usually also need additional reference to IEC 62471, light biosafety
testing. NRTL certified implementation of standards UL1993, UL8750 and UL1310; FCC implementation
of standards for the FCC PART15 Subpart B. In China for LED lights is a voluntary certification (CQC),
perform standard GB24906-2010 (safety) and GB 17743-2007 (electromagnetic compatibility).
The NRTL certification (such as UL, MET, CSA, etc.) in the United States belonging to the non-mandatory
certification, the performance of product safety testing and certification, the scope of its certification
indulgence products EMC (EMC) characteristics. LED lighting products use the test standards UL8750,
UL 48, UL 496, etc.. UL8750 application will be installed in a non-hazardous location rated 600V branch
or lower the minimum securityrequirements of the components of the LED light source, the same applies
in connection to the battery, fuel cell isolation (no valid connection) Power the minimum security
requirements of the LED light source.
